Based on the same technology Ecovortek Pty Ltd produces two different models, the Universal unit and the Compact (Companion) unit, and three different types within each model, Type A, Type B and Type C. Different sizes catering for different flow rates are produced ranging from 9 mm to 150 mm. All these Models have WaterMark Certification, WMKA 22024, for use in potable water situations, with an operating temperature between 1°C and 50°C and a maximum operating pressure of 1250kPa.
The following tables describe each model and type and list their model number:
| Model Number | Type A | Type B | Type C | Inlet and Outlet OD | End Connection | Flow Tube OD | Flow Rate Litres/min (Min/Max) |
|---|---|---|---|---|---|---|---|
| UAT15 |  |
- | - | DN 15, 12mm, NPS 1/2" | 1/2" BPS thread end | 15mm | 0.5/50 |
| UCT15 | - | - | |
||||
| UAT22 | |
- | - | DN 20, 19mm, NPS 3/4" | 3/4" BPS thread end | 20mm | 5/150 |
| UCT22 | - | - | |
||||
| UAT35 | |
- | - | DN 32, 19mm, NPS 3/4" | 1 1/4" BPS thread end | 35mm | 10/350 |
| UCT35 | - | - | |
||||
| UAT54 | |
- | - | DN 50, 50mm, NPS 2" | 2" BPS thread end | 65mm | 50/800 |
| UCT54 | - | - | |
||||
| UAT108 | |
- | - | DN 100, 10mm, NPS 4" | 4" Adaptor Flange ANSI 150 | 108mm | 100/1,700 |
| UCT108 | - | - | |
||||
| UAT150 | |
- | - | DN 150, 150mm, NPS 6" | 6" Adaptor Flange ANSI 150 | 150mm | 150/3,500 |
| UCT150 | - | - | |
| Model Number | Type A | Type B | Type C | Inlet and Outlet OD | End Connection | Flow Tube OD | Flow Rate Litres/min (Min/Max) |
|---|---|---|---|---|---|---|---|
| CA10 | |
- | - | DN 10, 9mm, NPS 3/8" | 3/8" BPS thread using a 3/8"-3/8" nipple & kin-ko nut |
15mm | 1/35 |
| CB10 | - | |
- | 0.5/25 | |||
| CC10 | - | - | |
1/35 | |||
| CA15 | |
- | - | DN 15, 12mm, NPS 1/2" | 1/2" BPS thread using a 3/8"-1/2" nipple & kin-ko nut |
15mm | 1/35 |
| CB15 | - | |
- | 0.5/25 | |||
| CC15 | - | - | |
1/35 |
